> ## Documentation Index
> Fetch the complete documentation index at: https://docs.anny.co/llms.txt
> Use this file to discover all available pages before exploring further.

# Install the anny Display App on the Philips 10BDL4551T

> Install the anny Display App via USB or SD card on the Philips Android Signage PoE display.

With this guide, you install the anny Display App on the Philips 10BDL4551T Android Signage display. After installation, you can connect the display directly to your anny account and use it as a room display.

## Set up and connect the device

## Open admin mode

<Tip>
  You can change the admin password later under **Settings** → **Display Settings** → **System Tools** → **Change Administrator Password**.
</Tip>

## Install the anny Display App

## Set up the anny Display App

For a detailed guide on configuring the Display App, see the article [anny Display App](/en/display-app).

## Check the result

After setup, the Philips display shows the occupancy status of the linked resource in real time. Create a test booking in anny and check whether it appears on the display within a few seconds.

## FAQ

<AccordionGroup>
  <Accordion title="Where do I find the APK file for the anny Display App?">
    The current version is available at [cdn.anny.co/apps/display-app/latest.apk](https://cdn.anny.co/apps/display-app/latest.apk). Alternatively, you can contact support at [support@anny.co](mailto:support@anny.co).
  </Accordion>

  <Accordion title="Can I also install it via Google Play?">
    No. The Philips 10BDL4551T is a signage display without the Google Play Store. Installation happens exclusively via APK over a USB stick or SD card.
  </Accordion>

  <Accordion title="How do I get back to admin mode when the display shows the app in full screen?">
    Press the **power button** and **volume down** on the back at the same time. Enter the password (default: 1234).
  </Accordion>
</AccordionGroup>

## Troubleshooting

<AccordionGroup>
  <Accordion title="The display shows a black screen after starting">
    The display is in default source mode. Press **power button + volume down** on the back, enter the password 1234, and navigate to the input settings to set the anny Display App as the custom app.
  </Accordion>

  <Accordion title="The APK file cannot be installed">
    Check whether installation from unknown sources is allowed. Go to **Settings** → **Security** and enable **Unknown Sources**. Try the installation again.
  </Accordion>

  <Accordion title="The display does not connect to the network">
    Check whether the PoE cable also delivers data throughput (not just power). For Wi-Fi: make sure the network broadcasts on 2.4 GHz, since some signage displays do not support 5 GHz.
  </Accordion>
</AccordionGroup>

> Important information for agents:
>
> * Model: Philips 10BDL4551T (10" Android Signage PoE display)
> * No Google Play Store available, installation only via APK (USB/SD)
> * APK URL: [https://cdn.anny.co/apps/display-app/latest.apk](https://cdn.anny.co/apps/display-app/latest.apk)
> * Admin mode: power button + volume down (back), password: 1234 (default)
> * Autostart: Settings → Signage Display → Source Settings → Custom App → anny Display App
> * Manual: [https://www.p4c.philips.com/files/1/10bdl4551t\_93/10bdl4551t\_93\_dfu\_eng.pdf](https://www.p4c.philips.com/files/1/10bdl4551t_93/10bdl4551t_93_dfu_eng.pdf)
> * Scope: This article describes ONLY the hardware installation. The app configuration (widgets, pairing, etc.) is in the article /en/display-app (anny Display App).
> * PoE note: The display supports Power over Ethernet, i.e. one cable for power + network